VEX330C1

Conditions:

- Density = 1.2 kg/m³
- Pressure ratio < 1,11
- other points in acc. with EC327/2011 (see product instructions)

VEX330C1

		Capacity curve with Coarse 85% filters (M5)
		SFP curve
		Operating curves
A:		Pressure loss supplement with ePM1 55% filter (F7)
B:		Pressure loss supplement for heating/cooling coil

To calculate capacity data use the product selection tools Quickselect and EXselect.

Total energy consumption is divided equally between the extraction and supply air fans.

Absorbed power with VEX: P₁(W) = SFP (J/m³) x q_v (m³/s).

VEX330C1

	Efficiency with condensation: Extract air = 20°C/55 RH Outdoor air  = -10°C/50 RH Balance between supply air/extract air = 1,0
	Efficiency without condensation with imbalance: Extract air = 25°C/28 RH Outdoor air = 5°C/50 RH Balance between supply air/extract air  = 0,8
	Efficiency without condensation in acc. with EN308: Extract air = 25°C/28 RH Outdoor air = 5°C/50 RH Balance between supply air/extract air = 1,0

Calculation

The temperature efficiency of the VEX units is shown at different airflow ratios, calculated as:

VEX330C1

VEX330C-1 L_WA1 - Suction side
 

VEX330C-1 L_WA2 - Pressure side
 

VEX330C-1 L_WA3 - Surroundings
 

VEX330C1 

The VEX330 Ceiling unit with hinged or sliding door is available as a LEFT or RIGHT model.
The drawing below shows the solution with a hinged  door system.

VEX330C1- Left

VEX330C1 - Right

VEX330C accessories - heating coils

Space demand

The following cooling and heating coils are suitable for VEX320-330