VEX1000RS

• Multi-occupancy residential housing

• New

• Refurbishment

• Non-residential buildings

• Schools

VEX1000 brings fresh, filtered air into the building and recovers heat from the exhaust air using the high-efficiency heat exchanger. The incoming air can be heated and/or cooled using a complete range of integrated cooling and heating coils.

VEX1000 is a compact unit designed to deliver the highest possible air capacity with the least possible space requirement.

VEX1000RS can be equipped with automatic leakage control, ALC™, which eliminates the transfer of particles, aerosols, viruses, etc., from exhaust air to supply air through the heat exchanger. Thus, you get all the benefits of a rotary heat exchanger without leakage:

• Moisture transfer provides improved indoor climate and higher productivity

• Does not require defrosting

• Saves energy by cooling recovery

• No need to handle condensation

• Compact design

• 1x230V or 3x400V power supply

• Mixing section (VEX1030 – 1080)

• Duct silencers

• Outdoor units (Roof, plinth, doorstop, damper motor cover, electric heater for control box)

• Shut-off damper

• Integrated coils (Water, Electric, DX)

• External casing for DX and combined water heating and cooling coil with drip tray and droplet separator

• Patented automatic leakage control (ALC™)

• Rotating heat exchanger with sorption and epoxy coating

• Choice between bag and panel filter

• Choice between integrated EXcon+ control, controller ready or without control

• Flexible duct connections

• Option for extract and/or exhaust air outlet positioned on top

• Class 3 damper

VEX1000 leveres færdigtestet i enten 1 eller 2 moduler fra fabrikken.

VEX1005 til VEX 1020 leveres som et samlet modul, mens VEX1030 til VEX1080 leveres i to moduler.

Dette gør at VEX1000 nemt kan transporteres til montagestedet.

MECHANICAL PERFORMANCE: In accordance with DS/EN 1886 and certified by Eurovent

• Strength of unit casing: D2 (M)

• Leakage at negative pressure of -400 Pa: L1 (M)

• Leakage at positive pressure of +700 Pa: L2 (M)

• Filter bypass leakage: F9 at negative and positive pressure

• Thermal transmittance: T2 (M)

• Thermal bridging factor: TB2

VEX1000 is delivered fully tested in either 1 or 2 modules from the factory.

VEX1005 to VEX 1020 are delivered as a complete module, while VEX1030 to VEX1080 are delivered in two modules.

The product can be delivered on adjustable mouting feets or mounted together on a baseframe.

A quickguide is included, which instructs in easy and quick assembly of the product. Detailed instructions as well as service guides are easily accessed via the QR code on the front of the unit.

For projects with extra limited access conditions, VEX1000 can be delivered as SPLIT, where the unit can be easily and quickly disassembled, transported into the building, and reassembled.

Flexible placement of control box

Control and electrical panel are included in a separate control box, which can be mounted beside the unit or on the wall, up to 10 m from the VEX-unit. In this way, the box can be placed where it is most appropriate in terms of service and maintenance.

VEX1000RS is available with the option for extract and/or exhaust air nozzle placed at the top of the unit to provide greater flexibility at the installation site.

For units with round side nozzles and rectangular top nozzles, transition piece from square to round are offered.

NOTE. VEX1000 with rotary heat exchanger is also available with 4 top nozzles. See under the product VEX1000RT.

VEX1000 can be delivered with 3 control options:

• Integrated EXcon+ control (Standard) – The unit is equipped with EXcon+. All internal electrical and control components in the unit are connected to the included control box and tested from the factory.

• Controller Ready (Option) – All internal electrical and control components in the unit are connected to the electrical and control box, which is prepared for the installation of alternative control chosen by the customer. (External control components are not included)

• Without control (Option) – The unit is delivered without a control box, control, electrical wiring, and sensors. The customer is responsible for their own electrical and control setup. (Controls and motors for rotating heat exchanger, fans, and dampers are included)

The new EXcon+ control ensures optimal indoor climate management in virtually all application areas.

The intuitive user interface adapted to predefined user groups and optimized calendar function ensures easy and quick setting and adjustment of the indoor climate.

EXcon+ control is used to manage, among other things, air flow, heating, and cooling. How and when control switches between built-in functions are set in the operating program. The program can, if necessary, be overridden by temporary manual control, after which it returns to the active operating program.

Choosing EXcon+ provides, in addition to a wide range of standard control modes, the opportunity to use EXHAUSTO's patented Automatic Leakage Control (ALC™) and Dynamic Pressure Control (aDCV).

• Automatic Leakage Control (ALC™) allows taking advantage of a rotary heat exchanger without transferring contaminated air via the heat exchanger.

• Dynamic Pressure Control (aDCV) enables optimized operation with constant pressure regulation of ventilation systems with variable air volumes. Through the patented adaptive pressure regulation, up to 20% energy savings can be achieved compared to a demand-controlled system with constant pressure regulation (DCV).

EXcon+ control can be operated from a control panel, BMS, or web server over a network or via integrated WiFi. WiFi can be easily accessed from your tablet or PC by following the quick guide that comes with the control box.

EXcon+ network communication supports BacNet over TCP/IP and MODBUS over RS485 or TCP/IP.