VVR wall fan

Description of VVR wall fan

Description:

The VVR wall fan is an extraction ventilator manufactured in cast aluminium, ensuring long-term, problem-free operation. The MGO wall penetration is available for this, ensuring simple and correct ventilation.

The VVR wall fan has a backward-curved B impeller in aluminium with a radial air exhaust; it can be opened for cleaning. VVR is available in 4 sizes: VVR160, -200, -250, and -315.

Motors: 

VVR160 and -200 have a single-phase motor, while the other models have an EC motor. 

See also under Capacity below, and technical data for the different sizes under VVRxxx Technical Data

Capacity - overview

VVR

 

  Capacity m3/h
  Min. Max.
VVR160-4-1 60 370
VVR200-4-1 130 860
VVR250-4-1EC 250 1,900
VVR315-4-1EC 470 3,360
Construction

VVR


Design

 
VVR  150 x 100 VVR is made from cast aluminium, giving it a high corrosion resistance. It is painted in black RAL7021.


Vertical exhaust

 
VVR afkast

VVR is an extract fan with a vertical exhaust.

The design ensures an optimum air handling solution with minimum noise.



Fan impeller

 
DTH ventilatorhjul

VVR wall fan is ideal for ventilation tasks requiring efficient and economical ventilation.

The specially developed centrifugal impeller with backward curved blades ensures high efficiency and low operating costs.



Service

 
DTH adskilt  VVR roof fan is easy to open for cleaning and maintenance.


Guide panel

 
VVR ledeplade If there is a high level of humidity in the extract air, the VVR wall fan can be ordered with a guide panel.

The guide panel ensures that moisture does not run down the wall but is guided away from it.
Motor types

VVR wall fan

VVR is available with 2 motor types:

  • Single-phase voltage controlled motor
  • EC motor

The motors are made to protection class IP54 and all materials are as a minimum class F (155 °C). The motor  has integral current overload protection.


EC motor

The EC motor is a highly efficient permanent-magnet motor of class IE5 with motor control for a 1 x 230 V connection. The motor control has been specially developed for compatibility with the EXHAUSTO DTV roof fan and, when used with this motor, ensures the lowest possible operating costs.

The motor control protects the motor from overloading, blocking, over and under voltage, and over heating. It is factory programmed by EXHAUSTO for optimal operation of the fan. It only has to be connected to a 1 X 230 VAC supply and to an EXHAUSTO EFC1P or MAC12 controller.

The motor controls also provide a Modbus interface for fan control and alarm read-offs etc.


Single-phase motor

Single-phase motors can be selected for VVR160/VVR200. All motors are 4-pole with 1400 rpm, and permit direct voltage control using EXHAUSTO EFC16, EFC35 and MAC12 controllers (with MPR4/MPR8 module).

Installation

VVR wall fan

To ease installation an MGO wall vent can be used with the VVR wall fan.

The MGO wall vent is made from galvanised sheeting with 25 mm insulation against sound and condensation. An integral anti-backdraught shutter is included and the vent can be adjusted to lengths from 210 - 400 mm, to match the thickness of the wall. MGO can be mounted together with a diffusor, inlet sleeve ILMF and cover flange MGAF as shown below.

VVR monteret med MGO
1) Diffusor (not supplied by EXHAUSTO)

Installation solution 1

If an MGO wall vent terminates flush with the internal wall, an MGAF covering flange and an ILMF inlet sleeve must be fitted before the diffusor is fitted.

VVR 4-2
1) Diffusor (not supplied by EXHAUSTO)

 

Installation solution 2

If the MGO wall vent is shorter than the thickness of the wall, an ILU inlet and MF sleeve or SR spiral tube must be mounted and finished off with the diffusor.

VVR 4-3
1) Diffusor (not supplied by EXHAUSTO)

Installation solution 3

If there is a long distance between the MGO wall vent and the exhaust location, an ILU inlet connected to SR spiral tube must be mounted.

VVR 4-4


MGO sound damping

Pressure drop in MGO wall vent

MGO trykfald
Pt = Total pressure drop with open anti-backdraught shutter

Load attenuation 

Sound band 125 250 250 1000 2000 4000 8000
 Size [Hz] [Hz] [Hz] [Hz]  [Hz] [Hz] [Hz]
MGO160 -2 2 6 12 13 6 5
MGO200 -4 2 4 12 8 5 4
MGO250 -5 0 3 11 4 4 2
MGO315 -5 -1 1 10 4 4 3

Tolerance +/- 4 dB.
The load attenuation is stated including sound generation from the AO anti-backdraught shutter.
- = sound generation in relevant octave band from anti-backdraught shutter.

Conditions:

  1. Attenuation damping is stated for an airflow equal to 80% of max. output for VVR (1400 rpm) of the same size as the MGO.
  2. VVR mounted on a MGO with 350 mm length with anti-backdraught shutter.

 

Dimensional drawing for MGO

MGO Dimension 2018-12 
All dimensions in mm

 
MGO Size
 
Fits VVR
Dimensions:
 A
Ø [mm]
 B x B
[mm]
C
Ø [mm] 
 Kg
MGO160 VVR160 165 212 165 3
MGO200 VVR200 205 262 205 4
MGO250 VVR250 255 312 255 5
MGO315 VVR315 320 362 320 6

Add all about the product series VVR wall fan

CONTACT US TODAY

Get free advice on ventilation products and system solutions


Export Requests:
EXHAUSTO Export
Odensevej 76
DK 5550 Langeskov

Tel +45 6566 1236
E-mail: export@exhausto.dk

Calculation programs

Use EXHAUSTO's free calculation programs for calculating ventilation plant and system solutions

Go to Calculation Programs
Teaser ecodesign

Ecodesign Directive

EXHAUSTO VEX air handling units and fans comply with the Ecodesign Directive. Read more here.

See more about Ecodesign here