Empty section (SP)

SP Empty section - here shown with damper. This section can be used in projects where the rotor heating exchanger cannot be inspected from the next-door section.

Function and application

SP / SPS module

The SP section may be used in the following cases:

With rotary heat exchangers and in other locations where functions cannot be inspected from adjacent sections.
As support for overlying protruding sections for inlets and outlets in high units.
To extend overlying sections to avoid vertical pipe runs close to the unit preventing doors opening in a section.
As a basis for later expansion of functions or for space for sensors, thermometers, etc. Inspection spaces are provided with doors.

VEX4000 SP

SPS - Smoke evacuation section

SPS is an empty section with a spigot at the top. The spigot contains a damper which opens if the need arises for smoke evacuation in the duct system. The extract air fan is thus used as a smoke exhaust extractor, so an additional smoke extractor is not required.

Dimensions, dimensions table for SP section

SP, empty section

Dimensions table

VEX4000 model	½ Height/Height	Length	Depth
VEX4010 [mm]	702/1309	526	1055
VEX4020 [mm]	702/1309	526	1275
VEX4030 [mm]	797/1499	526	1549
VEX4040 [mm]	847/1599	526	1630
VEX4050 [mm]	919/1744	526	1755
VEX4060 [mm]	1077/2069	526	1930
VEX4070 [mm]	1077/2069	526	2115
VEX4080 [mm]	1209/2494	526	2325
VEX4090 [mm]	1334/2744	526	2625
VEX4100 [mm]	1474/3024	526	2895

The indicated dimensions are the dimensions for the section - use EXselectPRO to get the correct dimensions for the whole air handling unit, including assembly fittings and seals.

Add all about the product series Empty section (SP)

Get free advice on ventilation products and system solutions

Export Requests:
EXHAUSTO Export
Odensevej 76
DK 5550 Langeskov