:format(webp))
The purpose of the Eurovent certificate is to make it easy and clear to choose the best product for the task.
For you as a consultant or contractor:
Eliminate unnecessary risks – the product keeps its promise
Easy to find energy efficient products – clear data for each component
Easy to find the best product for the job – large selection of consistent, comparable products.
For you as a client:
Well-functioning systems – the product meets declared performance and energy consumption
More precise calculations – energy consumption is as calculated
Better products and more value for money – thanks to more fair and healthy competition.
For you as a manufacturer:
Equal playing field – for more fair and healthy competition
Transparency – increases trust in the industry
A clear message – it pays to produce good products and provide clear data.
(The above text is an excerpt from the folder “Eurovent certificate – when the inside counts” written by Dansk Ventilation).
Eurovent certification with associated energy classes is a voluntary scheme
Energy efficiency class
The following technical parameters are included in the energy class calculation:
Design outdoor temperature
Temperature efficiency at balanced airflows
Pressure loss over heat recovery unit
Air velocity through unit
“Absorbed Power Factor” calculated from the power consumption of the motors (corresponds approximately to SFP)
Categorize
EXHAUSTO’s VEX units meet the following requirements/classes (in accordance with EN1886 and EN13053)
Model: | VEX100, VEX100CF, VEX200 og VEX310-70 | VEX1000 | VEX4000 | VEX5000 |
Mechanical output | According to DS/EN 1886 | Iht. DS/EN 1886 | According to DS/EN 1886 | According to DS/EN 1886 |
Cabinet strength | D2 (M) | D2 (M) | D2 (M) | D2 (M) |
Density at -400 Pa | L1 (M) | L1 (M) | L1 (M) | L2 (M) |
Density at +700 Pa | L1 (M) | L2 (M) | L1 (M) | L2 (M) |
Filter bypass leakage | F9 | F9 | F9 | F9 |
Thermal factor | T2 (M), U1 ≤ 1.0 | T2 | T2 (M), U1 ≤ 1.0 | T3 (M), U1 ≤ 1.4 |
TB factor | TB3 (M) | TB2 (M) | TB3 (M) |
TB4 (M)
Corrosion according to | DS/EN ISO 12 944–2 | DS/EN ISO 12-944-2 | DS/EN ISO 12 944–2 | DS/EN ISO 12 944–2 |
Corrosion category | C4 | C5 | C4 | C4 |