VEX140H+V

Technical data, VEX140H+V

Conditions:
- Density = 1.2 kg/m³
- Pressure ratio < 1.11
- other points in acc. with EC327/2011 (see product instructions)

Temperature efficiency, VEX140H+V

	Efficiency with condensation: Extract air = 20°C/55 RH Outdoor air  = -10°C/50 RH Balance between supply air/extract air = 1,0
	Efficiency without condensation with imbalance: Extract air = 25°C/28 RH Outdoor air = 5°C/50 RH Balance between supply air/extract air  = 0,8
	Efficiency without condensation in acc. with EN308: Extract air = 25°C/28 RH Outdoor air = 5°C/50 RH Balance between supply air/extract air = 1,0

Calculation

The temperature efficiency of the VEX air hamdling units are shown at different airflow ratios, calculated as:

Dimensional drawings, VEX140H

VEX140H - Horizontal, Left (unit dimensions in mm)

 desired spigot location, position A or B, to be specified in order.
*) Allow a height for service in front of the unit equivalent to the unit width.
**) Allow a min. of 300 mm free height for service.

VEX140H - Horizontal, Right (unit dimensions in mm)

desired spigot location, position A or B, to be specified in order.
*) Allow a height for service in front of the unit equivalent to the unit width.
**) Allow a min. of 300 mm free height for service.

Dimensional drawings, VEX140V

VEX140V - Vertical, Left (unit dimensions in mm)

 desired spigot location, position A or B, to be specified in order.
*) Allow a height for service in front of the unit equivalent to the unit width.
**) Allow a min. of 300 mm free height for service.

VEX140V - Vertical, Right (unit dimensions in mm)

 desired spigot location, position A or B, to be specified in order.
*) Allow a height for service in front of the unit equivalent to the unit width.
**) Allow a min. of 300 mm free height for service.

Cooling and heating coils, VEX140CF

The following cooling and heating coils are suitable with VEX140/VEX140CF