External communication with EON control

The EON control system was used for VEX100 and VEX200 for many years. EON-BUS was used in the VEX100 series until 2012 and in the VEX200 series until the end of 2009. Find link to instructions and xif-files on the right side.

Now that the VEX100 has been relaunched, the EXact and EON control systems are discontinued.

Picture	Control system
	EON-BUS: - LON as standard communication - find XIF-files on right side The XIF files supporting EON-BUS software are valid from the relaunch in 2000 - should you require earlier versions, contact the Service Department.
	LON I/O Was used to convert analogue signals to LON, so that the EON-BUS could communicate with existing BMS systems. i.e. 0-10 VDC ⇒ LON
	iTool: Was used as Web server and MODBUS-gateway for VEX100 and VEX200 with EON-BUS installed. Can also be used with MAC11-22 (discontinued). Requirements according to iTool: Windows 7 or earlier

Download XIF-files and instructions

	VEX V037 for VEX100 Classic- (VEX100, software version 037.36.36)
	V100M2(VEX100, software version 2.10)
	V200M1(VEX200, software version 1.38)
	3001683, LONWORKS for VEX100/200
	3002699, iTool for VEX100 or MAC11-22